Courses
2 Carbon motor brushes for the A1 Elite quilting machine motor. These are NOT required for the new Platinum stitch regulator as they have a brushless motor.
NB: Regular maintenance of the brushes on your A1 Elite quilting machine is a good habit to get into.
- About every 3 months of daily use, remove the slotted plastic cover to remove a brush on either side of the motor and inspect them. Use a vacuum cleaner to suck/blow any carbon dust out of the motor.
- Once they have worn down to less than 1/2″ and the curved end is no longer shiny, then it is time to replace them.
- If you experience any black carbon dust accumulating under the motor on the top of your machine, then check immediately.
- If you experience your machine ‘popping’ or backfiring and not moving the needle up/down consistently, then check immediately.
Changing your motor brushes is NOT a regular requirement, only done when they have worn down enough to cause issues as described above. Regular maintenance will assist in the longevity of both the brushes & motor.
Please watch this video to ensure your understanding.
| Weight | .05 kg |
|---|---|
| Dimensions | 3 × 3 × 2 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
A1 Quilting Machine accessories
A1 Quilting Machine accessories
A1 Quilting Machine accessories
A1 Quilting Machine accessories
A1 Quilting Machine accessories
A1 Quilting Machine accessories
Reviews
There are no reviews yet.