A1 Quilting machine Foam Handle grips

A1 foam handle grips to replace your old and worn grips on your quilting machine.

Purchase a brand new pair of new 4″ long foam handle grips in the following colours to brighten up your quilting machine.

• Black
• Pink
• Orange
• Lime Green
• Orange

Installation tips:

1. Remove your old damaged foam handle grips by cutting them off.
2. Clean and wipe the steel handle bars.
3. Unplug your handle switches (if Platinum machine) by using forceps to pull the plug out & NOT compromising or using the wires to pull it out.
4. Add a few drops of dishwashing detergent to the inside of the new grip and extend as far as you can go with your finger in the middle to coat the inside of the handle grip.
5. Stretch the end with the detergent first over the handle switch and then rotate the foam grip down the metal bar until positioned correctly. This should slide easy with the detergent easing the movement.
6. Repeat for remaining handles as necessary.